Saturday, January 10, 2015
Silhouettes Summary
For this project, I was unsure of how I wanted to pose the gargoyle so I threw together a couple of silhouettes to get a general idea of poses I could use. This is not nearly as many silhouettes as I produced last time, but I feel a lot happier with these because they have much more of a focus, rather than looking like aimless blobs which I am unable to see anything in. I will be able to utilise many more of these silhouettes this time, rather than only being able to pick a few from hundreds.
Friday, January 9, 2015
ZBrush - Dynamesh and Masking
![]() |
| A perfecly normal sphere, with Polyframes (Shift F) turned on to show the polygonal geometry |
![]() |
| Jagged edges have formed because the resolution is too low |
![]() |
| The DynaMesh sub-menu can be located in the Geometry menu |
![]() |
| The mesh has been DynaMeshed |
You can activate DynaMesh by either pressing the button or, whilst sculpting with the DynaMesh button already pressed, by dragging a mask outside of the model. However, there are many drawbacks to using DynaMesh. DynaMesh does not consider topology so every area will be as detailed as everywhere else. There is also the issue that finely sculpted features will be blocky unless you increase the resolution.
![]() |
| When the masking tool (Ctrl) is selected, the cursor will turn yellow |
- When you are hovered over the mesh, the Masking tool will default to a pen, allowing you to draw on the mask.
- If you start creating a mask from outside the selection of the mesh, you will default to a rectangular mask.
- Dragging a mask outside the mesh while there is a mask applied will clear the mask.
- Clicking outside the mesh will invert the mask.
- Clicking on the mesh will soften the mask.
- Clicking on the mesh whilst subtracting (hold the Alt key) will sharpen the mask.
![]() |
| The darkened area of the mesh is where the mask is |
Mood Board - Stone Textures
This is a mood board to gather a feel for the texture of stone statues, as I am planning for this to be the material for my gargoyle. A lot of gargoyles from the medieval and Gothic periods were made from either limestone or marble. Since limestone was easier to carve and was fairly plentiful, it was used more, but over time it suffered from erosion. Marble was popular for sculpting due to its lucrative texture and the way it refracts light, but was also more expensive, thus not being utilised nearly as often as limestone. Some gargoyles had features rendered in lead, such as their waterspouts to lessen erosion even more.
In this respect, I am most likely going to make my gargoyle from limestone, so as to be as realistic as possible. This will mean I will have to keep in mind especially the aspects of erosion from rain and the water running through the spout, which may obscure many detailed features in my gargoyle.
Mood Board - Modern Gargoyles
Here are some pictures of a more modern take on gargoyles. Since there are more sculptural options with the use of supports built in the inside, gargoyles can become much more varied. However, due to an act passed in 1724 in the UK, gargoyles became a lot less popular as downpipes were required on all new buildings.
In a personal consideration, I will probably not pursue the design of a newer gargoyle as it will mean it will not be as much of a challenge, even if I do trade off a bit of creative freedom by doing so. If I pick a design of a traditional gargoyle I will have to consider more elements such as the possible erosion from weather damage, as well as where lichen and/or moss would grow. I will also have to consider historical and cultural aspects which simply do not exist to as big as an aspect as time goes on. This will help me practice more on a specific theme rather than being given as broad as just 'Gargoyles'.
Mood Board - Traditional Gargoyles
Here are a few images collected of older, more traditional gargoyles. There is an apparent theme throughout most of these, in that many of them are quite solid and jut far from the side of the building. Many of the gargoyles sport wings of some descriptor, often bat-like in nature. However, my idea is not to form my own creature out of parts taken from other creatures, but rather to take an established fantastical creature and try and interpret it into a sculptural form. These pictures instead are better served as an architectural resource, so that I can better understand how to pose my gargoyle so that it looks realistic when it would be mounted on a building.
Wednesday, January 7, 2015
The Definition of a Gargoyle
Before starting this project, one must be clear on what distinguishes a Gargoyle from any other sculpture.
First of all, to dispel a common misconception - Grotesques and Gargoyles are inherently different from each other, as the former are just statues that are mounted upon buildings whereas the latter have the primary purpose of directing water away from the building's face. Many people end up mistaking the two, since they share similar appearances as carvings of strange, eldritch creatures.
Gargoyles have historically existed since the ancient Greeks, but their most popular period was during the Medieval eras, as a practical way to draw the illiterate population to attend church. These gargoyles were often designed to look like animals, people or a mixture of the two so that these people would recognise them.
It is also believed that the designs of the gargoyles are meant to represent multiple things, as people used to be very superstitious and would often trust and believe in the beings that were represented in these statues. Some believed that the beings, in their grotesque appearance, would ward off evil as they stand guard over the building. As these structures were often placed upon churches, it could also be said that they were a warning to those outside the Church - that those who came inside to pray would be safe unlike the heathen folk who chose not to.
However, in most cases, the design of the gargoyle is a sense of architectural freedom whilst also serving an important purpose; the resulting look of the gargoyle is often dependent on the imagination of the architect. A lot were inspired by fantastical creatures or demons, often having wings, horns, beaks or clawed feet. Others took stock of famous myths, such as the leafed face of the Green Man.
References and Sources :
1) http://www.stratis.demon.co.uk/gargoyles/gg-ety-hist-myth.htm
2) http://www.cwrl.utexas.edu/~bump/oxford/gargoyles.html
First of all, to dispel a common misconception - Grotesques and Gargoyles are inherently different from each other, as the former are just statues that are mounted upon buildings whereas the latter have the primary purpose of directing water away from the building's face. Many people end up mistaking the two, since they share similar appearances as carvings of strange, eldritch creatures.
| Possibly the most well known building with gargoyles is the Notre Dame, which has many different designs |
| A gargoyle in the shape of a lion, as seen on the Cathedral Saint-Etienne de Meaux |
However, in most cases, the design of the gargoyle is a sense of architectural freedom whilst also serving an important purpose; the resulting look of the gargoyle is often dependent on the imagination of the architect. A lot were inspired by fantastical creatures or demons, often having wings, horns, beaks or clawed feet. Others took stock of famous myths, such as the leafed face of the Green Man.
| A gargoyle in the form of the 'Green Man' |
References and Sources :
1) http://www.stratis.demon.co.uk/gargoyles/gg-ety-hist-myth.htm
2) http://www.cwrl.utexas.edu/~bump/oxford/gargoyles.html
Tuesday, January 6, 2015
Project Brief for BA2
We have been set our next assignment which will be involving the use of digital sculpting to produce a game-ready asset. During this project, we will be learning how to use the program, ZBrush, as well as skills we have already picked up in the last project to design and create an asset that is optimised for use in games.
We will be expected to produce the following work for final submission:
We will be expected to produce the following work for final submission:
- A finalised digital sculpture (.zpr) and digital turntable (.mov).
- A document evidencing your iteration process (.pdf).
- A document showing examples of anatomical life drawing (.pdf).
- A reflective journal and 500 word evaluation, such as this blog (.pdf).
Our theme for this project is 'Gargoyles'. Throughout this project we will be expected to produce a gargoyle which, whilst keeping in the realms of realism and also considering historical and cultural aspects, can be based on whatever we see fit. We must also consider a range of approaches to tackle this project, using critical analysis to create a well-rounded sculpt. On top of this, we must also keep in mind the skills we will learn throughout the workshops and the application of them through our sculpture iterations.
I am excited to finally start a new project, as this will help me improve my skills in both 2D and 3D forms. I already have a few ideas in mind but I will have to explore these ideas more before I pin myself down on a concrete plan. I have already experimented lightly within ZBrush so this will help to improve me in this aspect, where I will hopefully pick up the skills to streamline my workflow and help me produce higher quality assets. I will make sure to improve a lot more on the iterative process this time around, as I felt that this was one of my weaker areas in the last project. Overall, however, I am looking forward to start working.
Subscribe to:
Posts (Atom)









